全讯网-皇冠网 (中国)有限公司官网

今天是
今日新發布通知公告0條 | 上傳規范

【百家大講堂】第236期:AI時代2.5/3D技術

發布日期:2019-09-11

講座題目:AI時代2.5/3D技術  Future 2.5/3D Technologies in AI Era

報 告 人:小柳光正 Mitsumasa Koyanagi(教授/GINTI中心主任)

時   間:2019年9月13日(周五)10:00-11:30

地   點:中關村校區信息實驗樓205會議室

主辦單位:研究生院、信息與電子學院

報名方式:登錄北京理工大學微信企業號---第二課堂---課程報名中選擇“【百家大講堂】第236期:AI時代2.5/3D技術

【主講人簡介】

  小柳光正(Mitsumasa Koyanagi)教授1947年生于日本北海道,并于1974年獲得日本東北大學博士學位。1974年至1980年于日立的中央研究實驗室發明了世界上第一款商業化的三維堆疊電容型動態隨機存取存儲器;1985年至1988年,他加入了位于美國加州的帕羅奧多研究中心,從事亞微米CMOS器件、多晶硅薄膜晶體管等的研究;1988年,加入廣島大學,從事亞微米器件加工及表征、器件建模、多晶硅TFT器件、三維集成技術、光學互連以及并行計算系統研究,并于1992年成功制備出柵長70nm的當時最小尺寸的MOS管,相關研究發表于當年的IEDM;1989年,在國際上首次提出基于晶圓鍵合工藝以及穿透硅通孔技術為基礎的三維集成技術并一直在該領域處于國際領先地位,所帶領的課題組已經在IEDM上發表相關研究論文10余篇;在三維集成以及光學互連領域有20余年的研究經驗,發表了300余篇署名期刊論文,國際會議受邀演講達到100余次, 為IEEE協會Fellow,日本應用物理學會Fellow,先后被IEEE協會、日本應用物理協會、日本文部科學省等授予多項獎勵。目前為日本東北大學教授、GINTI中心主任。

 

Mitsumasa Koyanagi (M86-M’90-F’97) was born in Hokkaido, Japan. He received the B.S. degree in electrical engineering from Muroran Institute of Technology, Muroran, Japan, in 1969 and the M.S. and Ph.D degrees in electronic engineering from Tohoku University, Sendai, Japan, in 1971 and 1974, respectively. 
 
From 1974 to 1980, he was with Central Research laboratory, Hitachi Ltd., where he invented a stacked capacitor dynamic random access memory (DRAM) memory cell, which was the first commercialized 3-D large-scale integration (LSI) system. From 1980 to 1985, he was with the Device Development Center, Hitachi Ltd. From 1985 to 1988, he joined the Xerox Palo Alto Research Center, Palo Alto, CA, where he worked on the research and development of submicrometer complementary metal-oxide-semiconductor (CMOS) devices, polysilicon thin-film transistors, and the design of analog/digital LSIs. 
 

In 1988, he joined the Research Center for Integrated Systems, Hiroshima University, Hiroshima, as a Professor, where he worked on scaled MOS devices, 3-D integration technology, optical interconnections, and parallel computer systems specific for scientific computation. He fabricated the smallest MOS transistor with a gate length of 70nm in 1992. He proposed a 3-D integration technology based on wafer-to-wafer bonding for the first time in 1989. 

 

Since 1994, he has been a Professor with Tohoku University(the Department of Machine Intelligence and Systems Engineering, the Department of Bioengineering and Robotics, and, currently, the New Industry Creation Hatchery Center), where his current interests are Nano-CMOS devices, memory devices, low-voltage and low-power integrated circuits, new intelligent memory for parallel processor systems, 3-D integration technology, optical interconnections, parallel computer systems specific for science computation, real-time image processing systems and artificial retina chips, retinal prosthesis, and brain-implant devices and brainlike computer systems. He has been researching 3-D integration technology and optical interconnection for more than 20 years.

 
Dr. Koyanagi was the receipt of the 2006 IEEE Jun-ichi Nishizawa Medal, the 1996 IEEE Cledo Brunetti Award, the 2001 Award of Ministry of Education, Culture, Sports, Science and Technology, the 1994 Solid-State Devices and Materials Award, the 2004 Optoelectronic Technology Achievement Award(Japan Society of Applied Physics), and the 1990 Okouchi Prize.

 

【講座信息】

    2.5/3D集成技術是未來適應AI時代應用的高性能、低功耗、多功能超大規模集成電路與系統關鍵技術之一。特別是隨著晶體管尺寸進一步縮小至10nm以下帶來的諸如器件設計/制造成本攀升、互連延遲等問題加劇,具備將在不同襯底材料上利用不同工藝節點技術制備的多種不同大小和功能的器件芯片等在同一硅晶圓上進行3D異質系統集成已逐漸成為延續摩爾定律的有效手段。本次講座將在回顧2.5/3D集成技術發展現狀基礎上,結合未來AI時代應用需求對2.5/3D技術發展要求進行解析和展望。

 

2.5/3D integration technology is the key for future LSIs with high-performance, low-power and multi-functionality in the future AI era. Especially, to mitigate various concerns caused by device scaling down to 10 nm or less, it is indispensable to introduce a new concept of heterogeneous 3D integration in which various kinds of materials, devices and technologies are integrated on a Si substrate. Future prospects of such a heterogeneous 3D integration technology will be discussed representing typical examples of heterogeneous 3D LSIs after the present situation of 3D integration technology is described.

 

怎么玩百家乐官网的玩法技巧和规则 | 百家乐看炉子的方法| 大发娱乐场| 百家乐赌博经历| 百家乐官网平台哪个比较安全| 百家乐赚钱方| 什么是百家乐官网的大路| 香港六合彩官方网站| 安龙县| 大发888游戏平台hplsj| 百家乐在线投注顺势法| 百家乐官网全自动分析软件| 3U百家乐娱乐城| 百家乐那里玩| A8百家乐官网娱乐网| 汝阳县| 百家乐规| 最大的百家乐网站| 百家乐官网趋势图怎么看| 皇冠真钱| 边城棋牌中心| 大发888游戏注册送98| 百家乐真人博彩的玩法技巧和规则 | 网络百家乐官网可靠吗| 娱乐城免费送彩金| 大发888在线登陆| 百家乐怎么玩会| 打百家乐最好办法| 百家乐博彩金| 百家乐官网记算| 3U百家乐官网娱乐城| 哪个百家乐官网最好| 金濠国际娱乐城| 大发888娱乐场下载ypu rd| 百家乐高额投注| 百家乐筹码防伪定制| 澳门百家乐官网小| 大三元百家乐官网的玩法技巧和规则| 免费下百家乐官网赌博软件| 合肥百家乐官网赌博机| 澳门百家乐官网娱乐城送彩金 |